1. Clean the wall surface with wire brush, sand paper or blade to remove all loose particles

2. Pre-wet / dampen the wall with sponge

3. Mix Gyproc Champion Putty to water (& not vice versa) in a ratio of 2:1 & stir thoroughly to make a thick paste

4. Apply first coat
starting from bottom
to upward direction
with putty blade.

5. Wait for 3 to 4 hours or complete drying

6. Sand the surface with fine mery paper (400 Grit) to remove blade scratch marks if any

7. Apply 2nd coat of putty with the blade.

8. Wait for 3 to 4 hours or complete dry surface & Paint the surface once the putty surface becomes smooth without any scratch marks

Download
Champion Putty
Brochure

Contact Us

PUTTY

Champion Putty

Putty (finishing plaster) is applied on the wall surface in an interior space to smoothen it prior to application of paint. This is done for all wall surfaces, i.e., brick-sand-cement or plaster boards.

Traditional putty cannot remove undulations in the surface in excess of 1 mm, which becomes a product limitation. In addition, inappropriate mixing of enamel-water in plasters can result in flaking of the painted surface.

Gyproc Champion Putty is made from high purity gypsum and provides protective base for expensive paints. Its superior water-resistance prevents paint from flaking even if the walls are damp. Special additives also offer anti-algal and anti-fungal protection.